Runs up very well and fitted with a 1.2m head with T-flails and hydraulic rear roller. Comes with the 600 series electric controls, A-frame stabiliser, telescopic boom, boom and head float and reversible rotor drive.

Serial no: PB660160556

The post 2016 Shelbourne Reynolds 660T Hedge Cutter appeared first on Oakfields AG.

Runs up very well and comes with the 7000 Series Joystick Controls, telescopic arm, axle brackets to suit Claas 640 Arion, oil cooler and 70hp oil system. The head is in very good order, fitted with T-flails and hydraulic rear roller. There are a couple of bushes that have been replaced on the power arm and the paintwork is a little scruffy but there is very little play in any of the pins and bushes and it is all working as it should!

Arm serial no: PB760150410 / Head serial no: THD15210218

The post 2015 Shelbourne Reynolds HD 760T Hedge Cutter appeared first on Oakfields AG.

Has had some welding and strengthening done but runs up well and all functions as it should.

Serial no: HM91D0400

The post 2017 Maschio Giraffona 230 Flail Mower appeared first on Oakfields AG.

This runs up well and is good spec with ‘A’ Frame linkage mounting and debris blower.

Serial Number: PB660211365

The post 2021 Shelbourne Reynolds 660T hedge cutter appeared first on Oakfields AG.

Runs smoothly and fitted with reasonable flails, although needs roller bearings and does have a couple of loose guards (making the noise in video). Manual lever control.

Arm serial no: 1428 E / Head serial no: 1274 EA

The post Bomford B467 Hedgecutter appeared first on Oakfields AG.

Fitted with 1.2m sliding mount Multicut head with direct drive motor and T-flails. The arm is fitted with a telescopic dipper boom, oil cooler and electric rotor reverse.

Arm serial no: M2164590 / Head serial no: M1851667

The post 2020 McConnel PA6565T Hedgecutter appeared first on Oakfields AG.

In very good condition throughout and comes with Revolution contols, Hy-reach and Parallel Arm Geometry, Telescopic arm, power slew with hydraulic breakback protection, oil cooler, LED strobes and fitted with a 1.2m MultiCut head with full width sliding mount, manual hood and roller adjustment and competition flails. 3 point linkage mounting with A-frame stabiliser. Done just 848 hours.

Power Arm serial no: M2063833 / Head serial no: M2164189

The post 2020 McConnell PA6565T Hedgecutter appeared first on Oakfields AG.

Ideal for a little compact tractor, with manual lever controls and PTO drive pump.

Serial Number: 2295

The post Kilworth BS Side Arm Hedgecutter appeared first on Oakfields AG.

1000PTO drive, front or rear mount, rear roller and fitted with good heavy duty hammer flails.

Serial No: S103530

The post Spearhead 250 RHD Front/Rear Flail Mower appeared first on Oakfields AG.

In good order and runs up perfectly. ICS controls with electric rotor reverse, 74hp pump, oil cooler, hydraulic breakout protection, electric arm and head float, linkage mounted and comes with an A-frame stabiliser. Fitted with a 1.2m Pro-Trim head with 115mm hydaulic roller and 40mm ProFlails. Recording 1599 hours and in good order throughout.

Arm serial no: B201023 / Head serial no: B201514

The post 2020 Bomford Hawk Evo 6.5m Power Plus Hedge Cutter appeared first on Oakfields AG.